Table of Contents

pfSense, OPNsense oder HardenedBSD auf dem HP t740 Thin Client**

Wenn Sie nach einem leistungsstarken Gerät zum Ausführen von pfSense, OPNsense oder HardenedBSD suchen, ist der HP t740 Thin Client möglicherweise die richtige Wahl für Sie.

Mehr Leistung und kompakter Heimserver

Der HP t740 Thin Client ist ein kompaktes Gerät, das als leistungsstarke pfSense-Box oder kompakter Heimserver verwendet werden kann. Es bietet mehr Leistung als das t730 oder das t620 Plus und ist daher eine geeignete Wahl für den Betrieb von PPPoE, insbesondere wenn Sie über Glasfaser-Internet verfügen. Es kann auch ein Upgrade-Pfad auf ein 10-Gigabit-Netzwerk angeboten werden.

PS/2 friert ein

Wenn Sie jedoch vorhaben, FreeBSD oder seine Derivate wie pfSense, OPNsense oder HardenedBSD auf dem Bare-Metal (im Gegensatz zu ESXi oder Proxmox) auszuführen, könnte ein Problem auftreten, bei dem das System beim Booten mit der Meldung „atkbd0: [ RIESENVERRIEGELT]`. Glücklicherweise kann dieses Problem gelöst werden, indem Sie am Boot-Prompt die folgenden Befehle eingeben:

unset hint.uart.0.at
unset hint.uart.1.at

Note that you need to unset both, otherwise, it will still lock up at boot.

After you install the OS, open a post-installation shell and run the following command:

vi /boot/loader.conf.local

Then, add these two lines:

hint.uart.0.disabled="1"
hint.uart.1.disabled="1"

Persist Changes using VI

For those not familiar with vi, you can add the line by doing the following :

Adding the lines hint.uart.0.disabled="1" and hint.uart.1.disabled="1" to the /boot/loader.conf.local file using the vi editor can be done with the following steps:

  1. Open the terminal on your FreeBSD system.

  2. Type vi /boot/loader.conf.local and press Enter to open the file in the vi editor.

  3. Press the i key to enter insert mode.

  4. Move the cursor to the bottom of the file using the arrow keys.

  5. Type hint.uart.0.disabled="1" without the quotes.

  6. Press Enter to start a new line.

  7. Type hint.uart.1.disabled="1" without the quotes.

  8. Press the Esc key to exit insert mode.

  9. Type :wq and press Enter to save and exit the file.

This will add the two lines to the /boot/loader.conf.local file, which will disable the UARTs and fix the freezing issue during boot on certain HP t740 “Thin Client” devices when running FreeBSD or its derivatives like pfSense, OPNsense, or HardenedBSD.

This will fix the issue across reboots and firmware upgrades on pfSense/OPNsense.

SSD

If you’re using the HP M.2 eMMC, it will not be detected on an out-of-the-box FreeBSD installation. In that case, you will need a third-party M.2 SSD. Any M.2 SSD can work, SATA or NVMe.

If you are looking for a third-party M.2 SSD for your HP t740 thin client, we recommend considering the Western Digital 500GB WD Blue SN570 NVMe or the Western Digital 500GB WD Blue SA510 SATA . Both of these options are reliable and should work well with your device. If you want to take advantage of both slots, you’ll need both. You’ll sacrifice the speeds of the NVME, but you’ll gain some redundancy that’s oh so important.

Note that the author of this article has successfully run pfSense CE 2.5.2 and OPNsense 22.1 on their t740 without any issues after following the above steps.

Troubleshooting and Post Install

After installation, if you encounter any issues with editing files, you can install the nano editor using pkg update and pkg install nano. This will help you edit text files with ease.

To ensure that the changes made to the /boot/loader.conf.local file persist across pfSense version upgrades, you need to add the following lines to /boot/loader.conf and /etc/rc.conf.local:

hint.uart.0.disabled="1"
hint.uart.1.disabled="1"

However, sometimes the editing of /boot/loader.conf.local file before rebooting doesn’t fix the issue. In such cases, it may be necessary to add the following lines at the beginning of the first boot:

unset hint.uart.0.at
unset hint.uart.1.at

Diese Schritte sollten die meisten Probleme lösen, die während und nach dem Installationsprozess auftreten können.

Verweise:

- HP t740 “Thin Client” - pfSense - OPNsense - HardenedBSD - ServeTheHome - FreeBSD (or pfSense/OPNsense) on the HP t740 Thin Client